Reflection Beam Splitters – a Specific Kind of Beam Splitters

The beam splitters used by InfraTec in multi channel detectors are solely reflection beam splitters and consist of highly reflective gold plated microstructures. The radiation entering through the aperture opening of the detector is split into several radiation beams of equal intensity but in different, predefined directions within the detector based on the architecture of the innovative microstructure inside. Each of the beams impinges on a corresponding pyroelectric sensor element with an upstream optical filter. The microstructures vary according to the detector type. In four channel detectors these resemble four-sided micro-pyramids, whereas in dual channel detectors these are V-shaped grooves.

Get in contact with InfraTec sensor division

Would You Like to Know More?

It is not unusual for tasks to be associated with special requirements. Discuss your specific application needs with our experienced engineers, receive further technical information or learn more about our additional services.


InfraTec GmbH
Infrarotsensorik und Messtechnik
Gostritzer Str. 61 – 63
01217 DresdenGERMANY

Accurate and Stable Measurement Results Over the Long Term

Unlike conventional multi channel detectors, beam splitter detectors only have one single aperture opening. Thus, major parts of the incoming radiation impinge vertical to the pyroelectric crystal, which allows for very precise gas analysis particular in gas detection technology. Hence, a gas cell with an effective diameter of just 2.5 mm is sufficient. Apart from an accelerated exchange of gas, this results in very low dead volumes of the measuring system. Measurement devices equipped with the detector can be correspondingly smaller. The permanently stable signal ratio between the individual channels ensures a high degree of measurement accuracy. This is because mechanical expansions in the optical system of the measurement device, ageing effects or any possible contamination in these detectors are already accounted for before the beam is split and thus affect all channels equally.

Detector Search

InfraTec offers five different product groups including approximately 50 standard pyroelectric detectors. Choose your suitable infrared detectors with the help of our detailed detector search.

Overview of all standard infrared detectors
Sensor division InfraTec detectors overview